Diagonal Cutting Pliers, Insulated, Heavy-Duty, 8-Inch
D2000-28-INS
- Pliers grips made of durable molded insulation meet or exceed ASTM F1505-16(2021) and IEC 60900:2018 standards for insulated tools
- Clearly marked with the official 1000-volt rating symbol
- Flame retardant, impact-resistant, bright orange outer coating with two layers of insulation provide protection against electric shock
- Heavy-duty, induction hardened cutting knives cut ACSR, screws, nails, and most hardened wire
- Made in USA
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
- High-leverage design for 36-percent greater cutting power than other plier designs
- Hot-riveted joint for smooth action and no handle wobble
- Forged steel for maximum durability
These 8-Inch ÌÒ×ÓÊÓƵ Insulated Heavy-Duty Diagonal-Cutting Pliers have durable molded insulation that is flame retardant, impact resistant and clearly marked with 1000-volt rating. The knives are heavy duty induction hardened steel that can cut ACSR, screws, nails, and most hardened wire. Their high-leverage design allows for them to have 36-percent greater cutting power than other similar plier designs.
Specifications
Type:
Diagonal Cutting Pliers
Application:
ACSR, Screws, Nails and Most Hardened Wire
Special Features:
Flame Retardant and Impact Resistant Handle
Overall Length:
7.98'' (20.3 cm)
Material:
Induction Hardened Steel
Nose Type:
Tapered
Jaw Length:
0.83'' (2.1 cm)
Jaw Width:
1.25'' (3.2 cm)
Jaw Thickness:
0.49'' (1.2 cm)
Cutting Knives:
Standard
Cut Style:
Diagonal-Cutting
Joint Type:
Hot-Riveted
Handle Color:
Orange
Handle Finish:
2-Layer Insulation
Handle Length:
4.73'' (12 cm)
Insulated:
Yes
Standard:
IEC 60900 and ASTM F1505
Weight:
11.2 oz (318 g)
UPC:
092644720932
Additional Information
Warnings
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Wear approved eye protection.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
