Screwdriver Set, 1000V Insulated, 6-Piece
85076INS
- Insulated Screwdriver Set includes 1/4-Inch Slotted and #2 Phillips in 4-Inch round shanks plus #2 Square, #1,#2 Phillips and 3/16-Inch Slotted tips in 6-Inch round shanks
- 1000V rated screwdrivers feature a layer of bright orange impact and flame resistant insulation to protect from electrical shock
- Made in the USA
- Tether hole for added safety when working at height
- Cushion-Gripâ„¢ handles for greater torque and comfort
- Tip-Ident® quickly identifies the screwdriver tip orientation so you can easily engage the screwdriver tip with the screw
- Meets or exceeds ASTM F1505-16(2021) and IEC 60900:2018
This 6-Piece Made in the USA Insulated Screwdriver Set features assorted ÌÒ×ÓÊÓƵ' Slotted, Phillips and Square tip screwdrivers. Each screwdriver is individually tested to exceed the IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock.
Specifications
Application:
For Work Near Energized Sources
Special Features:
Flame Retardant and Impact Resistant Handle
Included:
6 Screwdrivers: 4'' (10 cm) Shanks in 1/4'' (0.6 cm) Slotted and #2 Phillips Tips; 6'' (15 cm) Shanks in 3/16'' (0.5 cm) Slotted, #1/#2 Phillips and #2 Square Tips
Magnetic:
No
Insulated:
Yes
Shank Length:
4'' (10.2 cm); 6'' (15.2 cm)
Material:
Steel, Plastic
Handle Material:
Plastic
Handle Color:
Black
Handle Length:
4.31'' (10.9 cm)
Handle Diameter:
1.24'' (3.2 cm)
Color Code:
Orange
Overall Length:
8.32'' (21.1 cm); 10.32'' (26.2 cm)
Overall Height:
8.32'' (21.1 cm); 10.32'' (26.2 cm)
Overall Width:
1.24'' (3.2 cm)
Number of Pieces:
6
Type:
Insulated Screwdriver Set
Standard:
ASTM F1505-16(2021)
Weight:
1.6 lb (0.7 kg)
UPC:
092644851117
Additional Information
Warnings
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Whenever possible, always de-energize lines and equipment prior to working on or around them.
- Always inspect your tools before use.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Keep tool clean, dry and free of any surface contaminants.
